White Sign: Posts & Brackets

	NU180F/NU180X Blade sits parallel 180 degrees to post flange		RIB-BAK™ Green U-Channel Post Made of high carbon new billet steel, Grade SP-80 with a green baked on enamel and 3/8" holes drilled 1" on center the length of the post. Sizes range from 1.12 to 4 lbs/ft with 8', 10' and 12' lengths available. Approved by FHWA & AASHTO.
	OL90F/OL90X Blade sits at 90 degree to post flange		RIB-BAK™ Galvanized U-Channel Post Made of high carbon new billet steel, Grade SP-80 with hot dipped galvanized and 3/8" holes drilled 1" on center the length of the post. Sizes range from 1.12 to 4 lbs/ft with 8', 10' and 12' lengths available. Approved by FHWA & AASHTO.
	990F/990X 90 degree separator for use of two street signs		Round Galvanized Steel Post 2 3/8" O.D., minimum wall thickness of .064" with a weight of 1.64 lbs/ft schedule 5. Hot dipped galvanized finish to ASTM123 specs.
	922F/922X For 2 3/8" round posts		RIB-BAK™ Delineator Post Made of high carbon new billet steel, Grade SP-80 with green baked enamel finish. 3/8" holes drilled 1" on center. Sizes range from 1.12 to 4 lbs/ft with 5' and 7' lengths available. Approved by FHWA & AASHTO.
	457F/457X May be set at 45 or 180 degrees for oblique intersections. Two-piece cast aluminum bolt/nut set and 4 set screws.		Junior Drive Cap Fits upto 2 lb. U-Channel Posts
	#4 Wing Bracket May be bolted or strapped to posts. Secures flat or extruded aluminum street name or traffic control signs. Includes 2 set screws. Vandal Pruf hardware is also available.		Big Boy Drive Cap Fits 3-4 lb. U-Channel Posts. Heavy Duty.
	#8 Metro Wing Bracket May be bolted or strapped to posts. Secures flat or extruded aluminum street name, or traffic control signs. Includes hardware.		Drive Cap Welded, solid steel top. Will drive 2 3/8" OD Tubular posts.
	Z-238 Aluminum interlocking bracket sets. Secures one traffic control sign to 2 3/8" round posts.		One Man Piledriver Heavy duty driver, 45 lbs., long handle permits one man to drive posts upto 12' from ground level.
	BB-832 Secures two traffic control signs, facing opposite directions, to one 2 3/8" round posts.		Rhino Driver 3 7/8" master chuck. One man operation drives variety posts in seconds. 1700 blows/min. Reciprocating piston (only moving part) strikes post or adapter. Low air consumption rates, lightweight, hand-portable.
	BB7 Adjustable to fit large diameter posts, 4" upto 12" in diameter. Stainless Steel strapping, aluminum plus 5AA and buckles, add another 5AA for an additional sign on the opposite side of the post. Takes two units per sign.		Lap Splice Economical, safe bolted base breakaway alternative. One person installation. Available for use with upto a 4 lb. RIB-BAK post. FHWA and AASHTO approved.
	Chevron Bracket Aluminum bracket secures two chevron signs to a single post. The angle of the chevron signs may be adjusted after installation of the bracket, so the position of the post is no longer critical. CAB 1 for 12x18 and 18x24 CAB 2 for 18x24 and 24x30 CAB 3 for 24x30 and 30x36		Minuteman System Unique combination of posts and couplings result in a true 360 degree breakaway system. Installs in minutes by only one person, saving labor costs. Leaves a reusable stub 95% of the time after impact.
	SNAP-Snap-Lock Assembly Radiator-like clamp for quick mounting of signs. Needs only a screwdriver to tighten. 40" strap length.		Stainless Steel Bolt 5/16" x 2 1/2" vandal resistant bolt truss headed, un-slotted, carriage bolts zinc plated steel with serrated undercarriage.
	P4SS Stainless steel bracket for use on post 4" diameter or less.		One-Way Vandal Resistant Bolt 5/16" x 2 1/2" zinc plated steel head of bolt cut away to allow tightening one way only with straight edge screw driver.
	P5AA Aluminum bracket for use on post 4" diameter or less.		Button Head Bolt 5/16" x 3/4" vandal resistant bolt. Zinc plated steel 5/32" socket with center pin.
	Set Screw Standard zinc plated steel knurled with 5/32" socket		Hex Bolt 5/16" x 3/4"
	Vandal Proof Set Screw Zinc plated steel standard cup point 5/32" vandal resistant socket set screw with center pin. Requires a number F100 or number T100 installation tool.		Hex Nut 5/16"
	Rivets #18 Rivet for delineator posts #26 Rivet for 2# U-Channel posts #34 Rivet for 3# and 4# U-Channel posts		Breakaway Nut Requires a standard wrench or visegrip for installation. When nut is tight, keep twisting firmly to break off hex head.
	Post Cap Snaps on top of standard 2 3/8" OD round post.		TufNut Requires a standard wrench or visegrip for installation. Deters thieves from stealing your signs.